BBORVEX USA

Blog

Field-tested insight, not filler content.

Industry news, operator tips, case studies, maintenance guidance, training updates, and jobsite safety — written by people who've run the tools.

All PostsIndustry NewsTrainingTipsCase StudiesMaintenanceSafety
Tips

Choosing the Right Piercing Tool Diameter for Your Bore

Undersizing or oversizing a piercing tool is the single most common cause of steering drift on straightforward bores. Here's how to match diameter to conduit and soil.

·6 min read
Case Studies

Case Study: Regional Fiber Crew Cuts Average Bore Time 22%

A five-crew fiber contractor standardized on the Borvex BX-85 piercing tool and pulling eye system across their fleet. Here's what changed after 90 days.

·5 min read
Maintenance

The 100-Hour Service Checklist Every Crew Should Run

A short, disciplined service routine at the 100-hour mark prevents the majority of unscheduled tool downtime we see in the field.

·4 min read
Safety

Jobsite Safety: Managing Air Pressure Around Pneumatic Tools

Pneumatic piercing tools operate at pressures that demand the same respect as any other high-energy jobsite equipment. A refresher on safe setup.

·5 min read
Industry News

Introducing the BX-135: Our Largest Piercing Tool to Date

Built for large-diameter conduit and duct bank installation, the BX-135 extends the Borvex piercing tool line into heavier civil and municipal work.

·3 min read
Training

Inside the Borvex Certified Operator Training Program

A look at what's covered in our two-day certified operator course, from tool setup to advanced steering technique.

·4 min read
CallWhatsAppGet Quote