BBORVEX USA
BBORVEX USA

Technical Data Sheet

BX90-TDS · Rev. 1

2026

BX90

BX90 Pneumatic Piercing Tool

Product Overview

Mid-size model for broader utility, telecom and electrical installations

The BORVEX BX90 combines a 90 mm tool body with contractor-focused pneumatic performance for trenchless underground utility installations. Its mid-size format is suited for conduit, telecom, electrical and general service-crossing applications where greater tool mass and bore capacity are required. With a 45 kg operating weight, a 0.4–0.8 MPa pressure range, and air consumption of 1.2–2.0 m³/min, the BX90 supports controlled trenchless work with reduced surface disruption across broader utility applications.

Product imagery shown for layout reference. Final BX90 model photography will be added when available.

Temporary BORVEX BX Series product image used as layout reference for the BX90 page.
Outside Diameter
90 mm
Overall Length
Available Upon Request
Weight
45 kg
Air Consumption
1.2–2.0 m³/min
Operating Air Pressure
0.4–0.8 MPa
Impact Frequency
2.2–3.1 Hz

Complete Technical Specifications

Model
BX90
Tool Type
Pneumatic Piercing Tool
Outside Diameter
90 mm
Overall Length
Available Upon Request
Weight
45 kg
Impact Frequency
2.2–3.1 Hz
Operating Air Pressure
0.4–0.8 MPa
Air Consumption
1.2–2.0 m³/min
Recommended Bore Diameter
40–140 mm
Standard Pipe Diameter
75 mm
Connection
Contact BORVEX
Recommended Compressor
Contact BORVEX
Specifications Status
Confirmed

Applications

The BX90 is intended for mid-size trenchless utility work where contractors need greater tool diameter and mass than compact models. Contact BORVEX to confirm application fit for your soil conditions and bore requirements.

  • Fiber Optic Conduit

    For underground fiber conduit runs where controlled trenchless placement helps limit surface restoration.

  • Telecommunications

    Supports underground telecom conduit placement while reducing excavation requirements in service-access areas.

  • Electrical Conduit

    Supports trenchless conduit placement beneath landscaped areas, sidewalks and service-access zones while reducing open excavation.

  • Residential and Commercial Utilities

    For underground utility crossings and service connections in residential and light commercial settings.

  • Irrigation and Water Service Lines

    For trenchless placement of irrigation and water service pathways beneath hardscape and landscaped areas.

  • Road and Sidewalk Crossings

    For utility crossings beneath paved surfaces where minimizing open trenching is a project priority.

  • General Utility Installations

    For contractor-led trenchless utility work where a mid-size pneumatic piercing tool is specified for the bore.

Product Features

A mid-size BX Series platform with greater tool mass and diameter for contractors moving beyond compact-model applications.

  • 90 mm Tool Body

    Mid-size outside diameter provides additional mass for broader underground utility installation work.

  • 45 kg Operating Mass

    Heavier tool weight supports applications where more substantial pneumatic piercing equipment is required.

  • Mid-Size BX Series Configuration

    Positioned between compact and larger BX Series models for contractors evaluating the next step in bore capacity.

  • Pneumatic Impact Operation

    Operates within a 0.4–0.8 MPa air pressure range with an impact frequency of 2.2–3.1 Hz and air consumption of 1.2–2.0 m³/min.

  • Contractor-Focused Design

    Built for field crews installing conduit, telecom pathways, electrical service, and general utility crossings.

  • Rugged Jobsite Construction

    Field-ready layout intended for repeated use in active underground utility installation environments.

  • Serviceable Layout

    Designed to support practical inspection, maintenance, and wear-component replacement during service life.

  • Broader Utility Applications

    Suited for installation work that benefits from more tool mass and diameter than compact BX Series models.

Selection and Compressor Notice

Final tool and compressor selection must be confirmed based on installation diameter, bore distance, soil conditions, hose configuration, compressor output and jobsite requirements. Contact BORVEX before purchase or operation.

CallWhatsAppGet Quote